Alloysafe.com

Skip to Main Content »

Search Site

Category Navigation:

You're currently on:

3/4" #10 Blue Valve in Head Whole House Housing

Double click on above image to view full picture

Zoom Out
Zoom In

3/4" #10 Blue Valve in Head Whole House Housing


Email to a Friend

Be the first to review this product

Availability: In stock.

$34.99
Add Items to Cart Add to Cart
OR

Quick Overview

The 3/4" #10 Blue Valve in Head Whole House Housing is tested and Certified by NSF International to NSF/ANSI Standard 42 for material and structural integrity requirements. The Pentek 150164 #10 water filter housing features 3/4" inlet/outlets.
The Valve In Head simplifies changing filters. Simply turn the valve on the housing to stop the water through the housing and change the filter. You do not need to purchase and install separate shut-off valves. The 3/4" #10 Blue Valve in Head Whole House Housing is easy to install.
Pentek #10 Standard Valve In Head Whole House Water Filter Housing is highly durable with thick walls for increased strength. It features a pressure-relief/bleed button on the inlet side of cap. It can extend the life span of washing machines, water heaters, and other household appliances.
The Pentek 150164 #10 Standard filter housing can use a wide range of filters. Sediment as well as Carbon Drinking water filters can be used in this housing. The #10 VIH Filter Housing fits 2-3/8" to 2-7/8" diameter filter cartridges which makes it ideal for a wide variety of applications.
The dynamically sealing O-Ring prevents leaking and it should be replaced periodically to prevent leakages.
The 3/4" #10 Blue Valve in Head Whole House Housing is tested and Certified by NSF International to NSF/ANSI Standard 42 for material and structural integrity requirements. The Pentek 150164 #10 water filter housing features 3/4" inlet/outlets.
The Valve In Head simplifies changing filters. Simply turn the valve on the housing to stop the water through the housing and change the filter. You do not need to purchase and install separate shut-off valves. The 3/4" #10 Blue Valve in Head Whole House Housing is easy to install.
Pentek #10 Standard Valve In Head Whole House Water Filter Housing is highly durable with thick walls for increased strength. It features a pressure-relief/bleed button on the inlet side of cap. It can extend the life span of washing machines, water heaters, and other household appliances.
The Pentek 150164 #10 Standard filter housing can use a wide range of filters. Sediment as well as Carbon Drinking water filters can be used in this housing. The #10 VIH Filter Housing fits 2-3/8" to 2-7/8" diameter filter cartridges which makes it ideal for a wide variety of applications.
The dynamically sealing O-Ring prevents leaking and it should be replaced periodically to prevent leakages.
Culligan HF-150 Whole House Replacement Water Filter Information:
The water filter cartridge is not included with the housing. This allows you to purchase the best water filter for your water supply.
The water filter cartridge life depends on the water filter cartridge purchased, the quality of your water, and the amount of water used. You will know when to change the filter cartridge when your water pressure drops.
Sediment water filters reduce dirt, sand, silt, sediment, rust particles, and scale particles. Choose from one of our sediment water filters at the 10" L x 2.5" W Standard Filter Page.
Drinking water filters produce healthier, better-tasting drinking water by reducing chlorine taste and odor and other contaminants. Choose from one of our carbon drinking water filters at the 10" L x 2.5" W Standard Filter Page.
Most Popular Water Filters for the Culligan HF-150 Whole House Housing:
Sediment Filters:
P5 5 Micron Sediment Filter
ECP5-10 5 Micron Pleated Filter (Recommended for chlorinated water only)
Carbon Filters:
CBC-10 0.5 Micron Chlorine Taste & Odor and Cyst Reduction Carbon Block Filter
GAC-10 20 Micron Chlorine Taste & Odor Reduction Filter
Recommended Parts & Accessories:
Replacement OR-34 O-Rings. One o-ring is included with the housing purchase, but you should replace the o-ring periodically to prevent leaks.
Use silicone grease to lubricate the o-rings to prevent leaking.
Use the SW-2 housing wrench to remove the sump. The wrench should NOT be used to tighten the sump back onto the cap. Over tightening may cause damage to the o-ring.
Use a single UB-1 stainless steel mounting bracket to mount the whole house housing.
Culligan HF-150 Whole House Housing Installation Information:

3/4" inlet/outlet for easy installation on a cold water line.

A UB-1 mounting bracket is recommended for installation of the Culligan HF-150 whole house water filter housing.

NOTE: When installed, protect housing against freezing to prevent cracking of the filter and water leakage.

Culligan HF-150 Detailed Installation Instructions

Product Tags

Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
 

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.