Alloysafe.com

Skip to Main Content »

Search Site

Category Navigation:

You're currently on:

Pentek P5 Sediment Water Filter

Double click on above image to view full picture

Zoom Out
Zoom In

Pentek P5 Sediment Water Filter


Email to a Friend

Be the first to review this product

Availability: In stock.

$4.99
Add Items to Cart Add to Cart
OR

Quick Overview

Designed for purity, bacteria resistance, and chemical resistance, P5 Sediment Water Filter is a 5 micron extra-fine sediment water filter which reduces extra fine dirt, sand, sediment, silt, rust particles, and scale particles. It is resistant to chemicals and corrosion.
Made of Polypropylene fFibers, the Pentek P5 and the Culligan P-5 water filter cartridges fit in whole house water filter systems and reverse osmosis systems. It is easy to install in whole house system. Its temperature rating is 40°F to 145°F (4.4°C to 62.8°C). Replace the sediment water filter cartridge every 2 months or 8,000 gallons of water.
Pentek P5-20 Sediment Water Filter, Pentek P5-30 Sediment Water Filters (1 Case/20 Filters) and Pentek P5-30 Sediment Water Filters (1 Case/20 Filters) are the similar products.
Designed for purity, bacteria resistance, and chemical resistance, P5 Sediment Water Filter is a 5 micron extra-fine sediment water filter which reduces extra fine dirt, sand, sediment, silt, rust particles, and scale particles. It is resistant to chemicals and corrosion.
Made of Polypropylene fFibers, the Pentek P5 and the Culligan P-5 water filter cartridges fit in whole house water filter systems and reverse osmosis systems. It is easy to install in whole house system. Its temperature rating is 40°F to 145°F (4.4°C to 62.8°C). Replace the sediment water filter cartridge every 2 months or 8,000 gallons of water.
Pentek P5-20 Sediment Water Filter, Pentek P5-30 Sediment Water Filters (1 Case/20 Filters) and Pentek P5-30 Sediment Water Filters (1 Case/20 Filters) are the similar products.
Pentek P5-30 Polypropylene Water Filter Cartridge Specs:
Dimensions: 30" x 2-3/8" (762 mm x 60 mm)
Micron Rating (Nominal): 5 Micron
Temperature Rating: 40°F to 145°F (4.4°C to 62.8°C)
Initial ∆P (psi) @ Flow Rate (gpm): 0.2 psi @ 10 gpm (<0.1 bar @ 38 L/min)
Pentek P5-30 Sediment Filter Materials of Construction:
Filter Media: Polypropylene Fibers
Pentek / Ametek P5-30 Water Filter Instructions:

NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Product Tags

Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
 

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.