Alloysafe.com

Skip to Main Content »

Search Site

Category Navigation:

You're currently on:

Shop by

Shopping Options

Price
  1. $0.00 - $100.00 (30)
  2. $100.00 - $200.00 (38)
  3. $200.00 - $300.00 (12)
Manufacturer
  1. Pentek (80)
 

Steel Housing High Flow Nylon Filter Bags

Items 1 to 10 of 80 total Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next
Show per page
View as: Grid  List  Sort by Set Descending Direction
Pentek NMO100P1S Nylon Filter Bags (20 Bags/Case)
$189.99

The Pentek NMO100P1S Nylon Filter Bags (20 Bags/Case) are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms. They can withstand temperatures up to 300°F. The Filter Bags are a Size #1 which means they are 7 inches in diameter and 16.5 inches in length. The bag filter area is 2.0 square feet. The Pentek NMO100P1S bag filters are rated to nominal 100 microns.

The Pentek NMO100P1S Nylon Monofilament Filter Bags are made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates. There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed. The Pentek NMO100P1S bag filter has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes.

Dimensions of the device are 7" W x 16.5" L and the Filter Size is # 1. The Maximum Temperature is 300°F (bags only) and the Filter Media is Nylon monofilament. Filter Finish is Glazed and the Ring Material is Galvanized Carbon Steel. Maximum Flow Rate is 100 gpm. Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.

The Pentek NMO100P1S Filter Bag Alternate Part #'s include Pentek # NM0100P1S Filter Bag; Pentek # 255050-03 Filter Bag; Formerly Ametek # 255050 Filter Bag; Formerly US Filter # 255050-75 Filter Bag and Grainger # 4BB84 Filter Bag.
Learn More

Add to Wishlist | Add to Compare

Pentek NMO100P2S Nylon Filter Bags (20 Bags/Case)
$289.99

The Pentek NMO100P2S Nylon Filter Bags (20 Bags/Case) are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms. They can withstand temperatures up to 300°F. The bag filters are rated to nominal 100 microns. The Pentek NMO100P2S Nylon Filter Bags are a Size #2 which means they are 7 inches in diameter and 32 inches in length. The bag filter area is 4.4 square feet.

The Pentek NMO100P2S Nylon Monofilament Filter Bag has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes. The filter bag is made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates. There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed.

Dimensions of the device are 7" W x 32" L and the Filter Size is # 2. The Maximum Temperature is 300°F (bags only) and the Filter Media is Nylon monofilament. Filter Finish is Glazed and the Ring Material is Galvanized Carbon Steel. Maximum Flow Rate is 220 gpm. Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.

Pentek NMO100P2S Filter Bag Alternate Part #'s include Pentek # NM0100P2S Filter Bag; Pentek # 255068-03 Filter Bag; Formerly Ametek # 255068 Filter Bag; Formerly US Filter # 255068-75 Filter Bag; and Grainger # 4BE30 Filter Bag.
Learn More

Add to Wishlist | Add to Compare

Pentek NMO100P3S Nylon Filter Bags (20 Bags/Case)
$119.99

The Pentek NMO100P3S Nylon Filter Bags (20 Bags/Case) are rated to nominal 100 microns. They are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms. The Filter Bags are a Size #3 which means they are 4.1 inches in diameter and 8 inches in length. The bag filter area is 0.5 square feet.

The Pentek NMO100P3S bag filter has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes.
The NMO100P3S filter bag is made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates.

The Pentek NMO100P3S Nylon Monofilament Filter Bags can withstand temperatures up to 300°F. There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed. Dimensions of the device are 4.1" W x 8" L and the Filter Size is # 3. The Maximum Temperature is 300°F (bags only) and the Filter Media is Nylon monofilament. Filter Finish is Glazed and the Ring Material is Galvanized Carbon Steel. Maximum Flow Rate is 30 gpm. Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.

Pentek NMO100P3S Filter Bag Alternate Part #'s include Pentek # NM0100P3S Filter Bag; Pentek # 255086-03 Filter Bag; Formerly Ametek # 255086 Filter Bag and Formerly US Filter # 255086-75 Filter Bag.
Learn More

Add to Wishlist | Add to Compare

Pentek NMO100P4S Nylon Filter Bags (20 Bags/Case)
$119.99

The Pentek NMO100P4S Nylon Filter Bags (20 Bags/Case) are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms. They can withstand temperatures up to 300°F. The Pentek NMO100P4S Nylon Filter Bags are a Size #4 which means they are 4.1 inches in diameter and 14 inches in length. The bag filter area is 1.0 square feet.

The Pentek NMO100P4S bag filter has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes.
The NMO100P4S filter bag is made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates. The Pentek NMO100P4S Nylon Monofilament Filter Bags are rated to nominal 100 microns.
There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed.

Dimensions of the device are 4.1" W x 14" L and the Filter Size is # 4. The Maximum Temperature is 300°F (bags only) and the Filter Media is Nylon monofilament. Filter Finish is Glazed and the Ring Material is Galvanized Carbon Steel. Maximum Flow Rate is 50 gpm. Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.

Pentek NMO100P4S Filter Bag Alternate Part #'s include Pentek # NM0100P4S Filter Bag; Pentek # 255104-03 Filter Bag; Formerly Ametek # 255104 Filter Bag; Formerly US Filter # 255104-75 Filter Bag; and Grainger # 4BE72 Filter Bag.
Learn More

Add to Wishlist | Add to Compare

Pentek NMO150P1S Nylon Filter Bags (20 Bags/Case)
$139.99

The Pentek NMO150P1S Nylon Filter Bags (20 Bags/Case) are rated to nominal 150 microns. They are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms. The Pentek NMO150P1S Nylon Filter Bags are a Size #1 which means they are 7 inches in diameter and 16.5 inches in length. The bag filter area is 2.0 square feet.

The Pentek NMO150P1S Nylon Monofilament Filter Bags can withstand temperatures up to 300°F. There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed. The Pentek NMO150P1S bag filter has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes. The NMO150P1S filter bag is made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates.

Dimensions of the device are 7" W x 16.5" L and the Filter Size is # 1. The Maximum Temperature is 300°F (bags only) and the Filter Media is Nylon monofilament. Filter Finish is Glazed and the Ring Material is Galvanized Carbon Steel. Maximum Flow Rate is 100 gpm. Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.

Pentek NMO150P1S Filter Bag Alternate Part #'s include Pentek # NM0150P1S Filter Bag; Pentek # 255051-03 Filter Bag; Formerly Ametek # 255051 Filter Bag; Formerly US Filter # 255051-75 Filter Bag; and Grainger # 4BB86 Filter Bag.
Learn More

Add to Wishlist | Add to Compare

Pentek NMO150P2S Nylon Filter Bags (20 Bags/Case)
$239.99

The Pentek NMO150P2S Nylon Filter Bags (20 Bags/Case) are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms. They can withstand temperatures up to 300°F. The Filter Bags are a Size #2 which means they are 7 inches in diameter and 32 inches in length. The bag filter area is 4.4 square feet.

The Pentek NMO150P2S bag filter has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes.
The NMO150P2S filter bag is made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates. The Pentek NMO150P2S Nylon Monofilament Filter Bags are rated to nominal 150 microns. There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed.

Dimensions of the device are 7" W x 32" L and the Filter Size is # 2. The Maximum Temperature is 300°F (bags only) and the Filter Media is Nylon monofilament. Filter Finish is Glazed and the Ring Material is Galvanized Carbon Steel. Maximum Flow Rate is 220 gpm. Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.

The Pentek NMO150P2S Filter Bag Alternate Part #'s include Pentek # NM0150P2S Filter Bag; Pentek # 255069-03 Filter Bag; Formerly Ametek # 255069 Filter Bag; Formerly US Filter # 255069-75 Filter Bag; and Grainger # 4BE32 Filter Bag.
Learn More

Add to Wishlist | Add to Compare

Pentek NMO150P4S Nylon Filter Bags (20 Bags/Case)
$99.99

The Pentek NMO150P4S Nylon Filter Bags (20 Bags/Case) are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms. They can withstand temperatures up to 300°F. The Pentek NMO150P4S Nylon Monofilament Filter Bags are rated to nominal 150 microns. There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed.

The Pentek NMO150P4S bag filter has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes.
The NMO150P4S filter bag is made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates. The Pentek NMO150P4S Nylon Filter Bags are a Size #4 which means they are 4.1 inches in diameter and 14 inches in length. The bag filter area is 1.0 square feet.

Dimensions of the device are 4.1" W x 14" L and the Filter Size is # 4. The Maximum Temperature is 300°F (bags only) and the Filter Media is Nylon monofilament. Filter Finish is Glazed and the Ring Material is Galvanized Carbon Steel. Maximum Flow Rate is 50 gpm. Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.

Pentek NMO150P4S Filter Bag Alternate Part #'s include Pentek # NM0150P4S Filter Bag; Pentek # 255105-03 Filter Bag; Formerly Ametek # 255105 Filter Bag; Formerly US Filter # 255105-75 Filter Bag; and Grainger # 4BE73 Filter Bag.
Learn More

Add to Wishlist | Add to Compare

Pentek NMO200P1S Nylon Filter Bags (20 Bags/Case)
$139.99

The Pentek NMO200P1S Nylon Filter Bags (20 Bags/Case) are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms. They can withstand temperatures up to 300°F. The Pentek NMO200P1S Nylon Filter Bags are a Size #1 which means they are 7 inches in diameter and 16.5 inches in length. The bag filter area is 2.0 square feet. There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed.

The Pentek NMO200P1S bag filter has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes.
The NMO200P1S filter bag is made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates. The Pentek NMO200P1S Nylon Monofilament Filter Bags are rated to nominal 200 microns.

Dimensions of the device are 7" W x 16.5" L and the Filter Size is # 1. The Maximum Temperature is 300°F (bags only) and the Filter Media is Nylon monofilament. Filter Finish is Glazed and the Ring Material is Galvanized Carbon Steel. Maximum Flow Rate is 100 gpm. Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.

Pentek NMO200P1S Filter Bag Alternate Part #'s include Pentek # NM0200P1S Filter Bag; Pentek # 255052-03 Filter Bag; Formerly Ametek # 255052 Filter Bag; Formerly US Filter # 255052-75 Filter Bag; and Grainger # 4BB88 Filter Bag.
Learn More

Add to Wishlist | Add to Compare

Pentek NMO200P2S Nylon Filter Bags (20 Bags/Case)
$229.99

The Pentek NMO200P2S Nylon Filter Bags (20 Bags/Case) are rated to nominal 200 microns. They are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms. The Pentek NMO200P2S bag filter has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes. The NMO200P2S filter bag is made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates.

The Pentek NMO200P2S Nylon Filter Bags are a Size #2 which means they are 7 inches in diameter and 32 inches in length. The bag filter area is 4.4 square feet. There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed. The Pentek NMO200P2S Nylon Monofilament Filter Bags can withstand temperatures up to 300°F.

Dimensions of the device are 7" W x 32" L and the Filter Size is # 2. The Maximum Temperature is 300°F (bags only) and the Filter Media is Nylon monofilament. Filter Finish is Glazed and the Ring Material is Galvanized Carbon Steel. Maximum Flow Rate is 220 gpm. Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.

Pentek NMO200P2S Filter Bag Alternate Part #'s include Pentek # NM0200P2S Filter Bag; Pentek # 255070-03 Filter Bag; Formerly Ametek # 255070 Filter Bag; Formerly US Filter # 255070-75 Filter Bag; and Grainger # 4BE34 Filter Bag.
Learn More

Add to Wishlist | Add to Compare

Pentek NMO200P3S Nylon Filter Bags (20 Bags/Case)
$104.99

The Pentek NMO200P3S Nylon Filter Bags (20 Bags/Case) are rated to nominal 200 microns. They are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms. The Pentek NMO200P3S bag filter has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes. The NMO200P3S filter bag is made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates.

The Pentek NMO200P3S Nylon Filter Bags are a Size #3 which means they are 4.1 inches in diameter and 8 inches in length. The bag filter area is 0.5 square feet. There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed. The Pentek NMO200P3S Nylon Monofilament Filter Bags can withstand temperatures up to 300°F.

Dimensions of the device are 4.1" W x 8" L and the Filter Size is # 3. The Maximum Temperature is 300°F (bags only) and the Filter Media is Nylon monofilament. Filter Finish is Glazed and the Ring Material is Galvanized Carbon Steel. Maximum Flow Rate is 30 gpm. Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.

The Pentek NMO200P3S Filter Bag Alternate Part #'s include Pentek # NM0200P3S Filter Bag; Pentek # 255088-03 Filter Bag; Formerly Ametek # 255088 Filter Bag; and Formerly US Filter # 255088-75 Filter Bag.
Learn More

Add to Wishlist | Add to Compare

Items 1 to 10 of 80 total Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next
Show per page
View as: Grid  List  Sort by Set Descending Direction
 

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.