Alloysafe.com

Skip to Main Content »

Search Site

Category Navigation:

You're currently on:

Reverse Osmosis System Inline Digital TDS Monitor

Double click on above image to view full picture

Zoom Out
Zoom In

Reverse Osmosis System Inline Digital TDS Monitor


Email to a Friend

Be the first to review this product

Availability: In stock.

$39.99
Add Items to Cart Add to Cart
OR

Quick Overview

Reverse Osmosis System Inline Digital TDS Monitor comes in two different inlet/outlet sizes: 1/4" or 3/8". Selection should be done based on the size of your reverse osmosis tubing.

The Before & After TDS Monitor measures total dissolved solids in the water before and after going through the RO membrane of the reverse osmosis system. It features easy to use quick connect fittings for installation on a 1/4" or 3/8" line. Simply cut the tubing before and after the reverse osmosis system and insert the tubing into the inline TDS meter to start monitoring the total dissolved solids in the water.

Its generic design fits all systems with 1/4" line or 3/8" line. It includes mounting clips. Also, it features mounting Velcro to mount the flow meter on a wall, cabinet, or another part of your water filtration system. Its storage temperature is 20 to 80 degrees Celsius and the operating temperature is 10 to 40 degrees Celsius.
Reverse Osmosis System Inline Digital TDS Monitor comes in two different inlet/outlet sizes: 1/4" or 3/8". Selection should be done based on the size of your reverse osmosis tubing.

The Before & After TDS Monitor measures total dissolved solids in the water before and after going through the RO membrane of the reverse osmosis system. It features easy to use quick connect fittings for installation on a 1/4" or 3/8" line. Simply cut the tubing before and after the reverse osmosis system and insert the tubing into the inline TDS meter to start monitoring the total dissolved solids in the water.

Its generic design fits all systems with 1/4" line or 3/8" line. It includes mounting clips. Also, it features mounting Velcro to mount the flow meter on a wall, cabinet, or another part of your water filtration system. Its storage temperature is 20 to 80 degrees Celsius and the operating temperature is 10 to 40 degrees Celsius.
* Water Treatment System Sennotech TDS Monitor Specifications:
* TDS Detection Range: 0-999 PPM
* TDS Sensitivity: 1 PPM
* Accuracy: +/- 2%
* Removal Rate Indicator: >80% Green flash; <80% Red flash
* TDS Probe Material: Stainless Steel
* Connection: 1/4" or 3/8" T quick connect fittings
* Wake Up Mode: Continuous or button control (battery saving)
* Storage Temperature: -20 to 80 degrees Celsius
* Operating Temperature: 10 to 40 degrees Celsius
* Power: 24V DC or two batteries
* Mounting Clip: 2 pieces included
* Dimension: 100 mm (H) x 40 mm (W)
* Weight: 25g
* Reverse Osmosis System Accessories:
* Use a TPG-100 Digital Tank Pressure Gauge to measure the air pressure in your Reverse Osmosis Bladder Tank. The RO Bladder Tank can lose air pressure and needs to be monitored.
* Reverse Osmosis TDS Monitor Instructions:

* Press button to measure the TDS values of both inlet and outlet water. Both TDS readings will be displayed on the "Before" and "After" windows on LCD.

* If the removal rate maintains above 80%, the removal rate indicator flashes green. If the removal rate drops below 80%, the removal rate indicator flashes red. When the removal rate indicator flashes red, change filter membranes as soon as possible.

* To repeat measurement, press button again.

* The unit automatically shuts off after approximately 30 seconds of power-on.

* When installing, select a location in the water system which is convenient for reading the LCD.

* Use the included mounting clips or Velcro to attach.

* Select two points in the water system for installing the inlet/outlet TDS probes(inside the compression threaded joint).

* Cut tubes at the selected points then push the ends of the tubes into the quick joint and make sure they are firmly connected.

Product Tags

Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
 

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.